Matching foundation to frame

A volumetric module transfers load at defined points, so piers under those points are efficient. A slab spreads load but brings concrete curing time and a wet trade onto a site chosen for speed.

Key takeaways
  • Prefab generally favours point loads over a full slab.
  • Screw piles cut site time on soft ground but need verification testing.
  • Frost depth and drainage decide the final detail.

Panelised buildings behave differently: they distribute load along the perimeter, which often suits a shallow strip or a stiffened raft.

Screw piles and helical systems

Helical piles install in hours with no spoil and no curing, which is why they dominate on remote and sloping sites. Each pile needs a torque reading recorded to confirm capacity.

On variable ground, allow for a verification pile and a possible increase in length. That is the main cost uncertainty with this method.

Drainage and detail

Keep the underside of a suspended unit ventilated and dry. Standing water under a building is the most common cause of premature corrosion on steel-framed units.

Finish the ground with a fall away from the structure and a free-draining apron. It costs little and protects the most expensive part of the building.

Want this applied to your site?

Send us your location, target size and budget range. A project advisor will reply within one business day.

Get a free recommendation →

Built to order
Need something we do not list? We can build it.
Custom layouts, sizes, cladding and full turnkey fit-out.
Describe your project
Tomas Berg
Written by

Tomas Berg — Structural & Compliance Lead

Structural engineer by training, code translator by necessity. Tomas maps every model against IRC, Eurocode, EN and NCC requirements before it reaches the production line.

View profile & all articles →