Now shipping to 40+ countries · CE & ISO-certified, factory-direct Get a quote in 24h →

Steel structure villa engineered to carry wide glazed openings

A villa built on a light-gauge steel frame: profiles are roll-formed to length from galvanised coil, panels are assembled and squared in the works, and the house arrives as walls, floors and roof ready to be screwed together on a prepared base.

Why this home
  • Profiles cut to the drawing, so the frame comes out square without site carpentry.
  • A continuous insulation layer outside the studs, so the metal stays warm.
  • Floor cassettes delivered with the deck fixed, lifted and screwed in a morning.
  • Web holes punched and grommeted at the works, never drilled on site.
  • Panels banded by elevation, with their own screws and flashings.

Choose a configuration

From $115 / set Factory-direct indicative price · exact quote after consultation
Factory-direct pricing Ships worldwide

A villa built on a light-gauge steel frame: profiles are roll-formed to length from galvanised coil, panels are assembled and squared in the works, and the house arrives as walls, floors and roof ready to be screwed together on a prepared base.

Profiles formed to length, screwed not welded

Walls and roof are framed in cold-formed galvanised profiles, cut to the drawing and fixed with self-drilling screws, so the tolerance comes from the roll-former rather than from a saw on site. Nothing is welded on the plot, which leaves the galvanised coating intact and takes hot-work supervision out of the programme.

Insulation kept outside the steel studs

Steel carries heat far better than timber, so the build-up puts a continuous insulation layer outside the frame and fills the stud zone as well, with the vapour barrier on the warm side and a drained cavity behind the cladding. That keeps the inner face of the profile above the dew point, which is what prevents condensation forming on the metal.

Open ground floor, floors as flat cassettes

A steel profile spans further than timber of the same depth, so the ground floor can stay open between the outer walls and the stair can land wherever the plan wants it. Upper floors arrive as cassettes with the deck already fixed, and they are lifted into place and screwed down in a morning. It is built for garage conversions, staff dormitories and retail units.

Service holes punched before the frame ships

Web holes for cables and pipes are punched at the works to a pattern agreed with the services drawings, with plastic grommets fitted so no cable rubs against cut steel. Nothing is drilled on site, and the service void behind the lining keeps pipes out of the insulation.

Panels stacked in the order they are raised

Wall panels travel banded and labelled by elevation, with the screws, brackets and flashings for each elevation in the same bundle, and a normal house fits on one lorry. Because the frame weighs a fraction of masonry, both the foundation and the lifting plan come down in size.

Sited for exposure, splash and drainage

Coastal salt, driving rain and ground water decide more about a steel house than the frame itself, so cladding, fixings and the base detail are chosen for the exposure of the plot rather than for a generic specification. The base stays above splash and the ground is graded away, so water never stands against the bottom rail.

Steel structure villa engineered to carry wide glazed openings — Specifications
Storeys2

Included as standard

  • Prefabricated structural frame
  • Roof and wall panels
  • Doors and glazing
  • Insulation package
  • Fastening system
  • Numbered assembly drawings

Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.

How is the frame protected before the roof goes on?

Panels are banded, kept off the ground on bearers and covered, and the site sequence closes the roof before the lining goes in, because a frame that fills with water has to dry before it can be closed. Any cut edge or drilled hole in the galvanising is touched up with a zinc-rich repair as the panels go up. On a coastal plot the panels should not sit unwrapped for long, since salt settles on them quickly.

How long does it take to assemble a steel structure villa?

Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.

What foundation does it need?

A concrete slab, strip footings or pier foundations are all suitable, depending on soil and local practice. We supply the connection details for each option, so your local builder can prepare the base while the kit is in production.

Can the layout be customised?

Yes — window positions, glazing size, the number of bedrooms and the balcony deck are adjusted before production. The kit ships numbered and pre-drilled for the plan you confirm, so late changes are the expensive kind. Finalise the plan with our advisors, then the factory cuts.

Can I hang kitchen units or a boiler on a steel-stud wall?

Yes, with the right fixing: a light item goes on self-drilling screws into the stud, while a wall cabinet, a boiler or a suspended pan needs a plywood or steel pattress behind the lining, fitted before the boards go on. The frame drawing shows where the studs and pattresses fall, so lay the kitchen and the plant room out against it. Do not rely on plasterboard plugs alone for anything heavy.

How is the steel frame of a steel structure villa protected from rust?

The framing arrives with a protective coating applied at rolling stage, and every cut, drill hole and weld made during fabrication is touched up before the wall closes. The detailing matters as much as the coating: the frame base stays above the drainage line, the cladding sits on a drained and ventilated cavity, and no steel is left buried in a wet build-up. Plots near the sea or in heavy condensation get a different specification, confirmed on drawings.

What happens to the frame if the cladding leaks?

The profiles are galvanised and the cavity behind the cladding is drained and ventilated, so a leak runs down the back of the boards and out instead of sitting against the steel. Even so, a persistent leak will reach the bottom rail in the end, which is why the base detail carries a drip and a ventilated zone. Check the cladding and the seals around openings at the same interval as the gutters.

Does a steel frame carry cold into the walls of a steel structure villa?

Steel conducts, so the insulation is arranged outside and around the frame rather than only between the studs, with a break at the wall ties and around the openings. Window fixings, the floor-to-wall junction and the roof edge are detailed on paper instead of being solved on site, because that is where a thermal bridge appears. Your advisor sets the wall build-up for the climate you reported.

Tell us your project.
We'll quote in 24 hours.

Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.

Reply within one business day NDA on request English · German · French · Spanish

Request a quote — Steel structure villa engineered to carry wide glazed openings