Studio and gym unit framed for showers, sound and group classes
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
- Each footprint fits a standard flatbed, keeping the route to your plot straightforward.
- Models across the range share one grid, so a second building lines up with the first.
- The frame is sized from your equipment schedule, so racks and platforms land on structure rather than on a lining.
- One clear training side lets a rig and a mirror wall run without a column in the way.
- A continuous insulated envelope holds class temperature while the door keeps opening.
Choose a configuration
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
A frame drawn around the equipment, not the room
Racks, a cable stack and a lifting platform each load a floor differently, so the frame is sized from the equipment schedule rather than from floor area alone. Each model is detailed for a design life of 50 years.
Comfort that survives a full class
A room holding twelve people behaves differently from one holding two: body heat and moisture climb, and the envelope has to hold temperature while the door keeps opening.
A floor that takes the work
The plan separates a sprung lifting zone from a hard-wearing circulation strip, because mats, dropped bars and trolley wheels ask different things of a surface.
Air and power sized for occupancy
Ventilation is calculated from the number of people in a session rather than the square metres, and extract is placed where warm moist air actually gathers.
One building, one delivery, one crew
The unit leaves the factory finished, so site work is a lift, a connection and a handover rather than a construction programme.
Placed for access, drainage and hire
A standalone gym needs a service vehicle to reach it and water to leave it, so pad, fall and door side are fixed together before anything is ordered.
| Design life | 50 years |
|---|
Included as standard
- Prefabricated structural frame
- Roof and wall panels
- Doors and glazing
- Insulation package
- Fastening system
- Numbered assembly drawings
Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.
Can the studio and gym unit host classes, a club or paying members?
A building of this type can serve a club or be let by session, but the rules for that use are local and stricter than for a private gym: opening hours, how many people may be inside, exits, visitor access and sometimes parking. Confirm the intended use with your authority before the layout is finalised, and our advisor supplies the dimension drawings and specification the application relies on. Say at quotation stage if paying members are expected, because layout and finishes are then chosen differently.
How much floor area does a studio and gym unit need for a class?
It depends on the discipline more than on a fixed number: a spin or circuit class wants a mat per person plus a metre of clearance around the equipment, while a strength session needs room behind the platform for a bar to be dropped safely. Give your advisor the class size and the equipment list, and the plan is drawn with the training floor, the circulation strip and the store as separate zones. The floor area then follows the layout rather than the other way round.
How long does it take to assemble a studio and gym unit?
Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.
What foundation does it need?
A concrete slab, strip footings or pier foundations are all suitable, depending on soil and local practice. We supply the connection details for each option, so your local builder can prepare the base while the kit is in production.
Can the layout be customised?
Yes — window positions, glazing size, the number of bedrooms and the balcony deck are adjusted before production. The kit ships numbered and pre-drilled for the plan you confirm, so late changes are the expensive kind. Finalise the plan with our advisors, then the factory cuts.
Can the studio and gym unit be built without columns in the middle of the floor?
Yes, when it is designed that way: wider spans use a deeper engineered beam or a trussed roof, and the clear floor is agreed with your advisor before the frame is drawn. Tell us what you want to hang from the structure — rigs, heavy bags, climbing ropes — because those loads go into designed points rather than a lining. The beam arrangement and the anchor positions appear on the structural drawings you approve.
How does the studio and gym unit stay fresh when a full class trains inside?
By sizing air movement for occupancy rather than floor area alone: the plan gives supply and extract for the number of people you expect in one session, a route for warm moist air to leave the room, and controls your instructor can set. Heat recovery is an option where winters are cold, so the extracted air does not take the heating with it. Tell your advisor your busiest session size, and the ventilation is calculated for that crowd.
Can the studio and gym unit include showers and a changing area?
Yes, and it is a drawing decision taken at specification stage: a wet zone whose floor is laid to drain, hot water calculated for the number of shower positions, and changing cubicles kept apart from the training floor. Your local plumber makes the supply and waste connections, while the drawings give the falls, the waterproofing detail and the position of every fitting. Say whether people only change or also wash, and the layout divides the space to match.
Related models
Tell us your project.
We'll quote in 24 hours.
Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.