Studio and gym unit kit with a galvanised steel frame
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
- The frame is sized from your equipment schedule, so racks and platforms land on structure rather than on a lining.
- One clear training side lets a rig and a mirror wall run without a column in the way.
- A continuous insulated envelope holds class temperature while the door keeps opening.
- Ventilation is calculated for the people in a session, not for the square metres.
- Machines, lighting and heating sit on separate circuits, so one trip does not black out the room.
Choose a configuration
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
A frame drawn around the equipment, not the room
Racks, a cable stack and a lifting platform each load a floor differently, so the frame is sized from the equipment schedule rather than from floor area alone. The frame is galvanised steel, with beam sizes set model by model across the range.
Comfort that survives a full class
A room holding twelve people behaves differently from one holding two: body heat and moisture climb, and the envelope has to hold temperature while the door keeps opening.
A floor that takes the work
The plan separates a sprung lifting zone from a hard-wearing circulation strip, because mats, dropped bars and trolley wheels ask different things of a surface.
Air and power sized for occupancy
Ventilation is calculated from the number of people in a session rather than the square metres, and extract is placed where warm moist air actually gathers.
One building, one delivery, one crew
The unit leaves the factory finished, so site work is a lift, a connection and a handover rather than a construction programme.
Placed for access, drainage and hire
A standalone gym needs a service vehicle to reach it and water to leave it, so pad, fall and door side are fixed together before anything is ordered.
| Structure | galvanised steel |
|---|---|
| Colors | Custom colours |
| Style | Modern |
Included as standard
- Prefabricated structural frame
- Roof and wall panels
- Doors and glazing
- Insulation package
- Fastening system
- Numbered assembly drawings
Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.
How much floor area does a studio and gym unit need for a class?
It depends on the discipline more than on a fixed number: a spin or circuit class wants a mat per person plus a metre of clearance around the equipment, while a strength session needs room behind the platform for a bar to be dropped safely. Give your advisor the class size and the equipment list, and the plan is drawn with the training floor, the circulation strip and the store as separate zones. The floor area then follows the layout rather than the other way round.
Can the unit take a lifting platform and dropped weights?
Yes, provided the platform is designed with the floor: a stiffened zone under the lifting area, a frame that carries the impact into the base, and a position chosen on the structural drawing. Dropped bars send a sharp load downward, so the platform and the floor build-up are specified together rather than a mat laid over a domestic deck. Tell your advisor the heaviest drop you expect and where the platform will sit, and the drawings show the reinforcement.
How is a gym building ventilated when the door stays shut in winter?
By treating air as a calculated system: supply and extract sized on the busiest session, a route for warm moist air to leave above the training zone, and controls an instructor can set without opening a panel. Heat recovery is worth having in cold climates, since it takes warmth out of the extracted air instead of throwing it away. Say how many people train at once and whether towels dry indoors, because both decide the air rates.
Does the unit include showers and changing rooms?
They can be part of the plan, and it is far cheaper to draw them than to add them later: a wet zone laid to a fall, hot water sized for the number of shower positions, and cubicles kept apart from the training floor. Your plumber makes the supply and waste connections on site, while the drawings carry the falls, the waterproofing and every fitting position. Say whether people only change or also wash, and the layout divides the space to suit.
Can one studio and gym unit be split between work and training?
Yes, and the split is a drawing question: a partition that stops short of the roof line keeps light and air shared while separating sound, or a full wall with its own door gives two rooms that can be used at once. The electrical board, the ventilation and the heating are then divided by zone so one half can run without the other. Tell your advisor the balance you want, and the plan arrives with both uses measured.
How is a standalone gym building delivered and set on site?
It travels as a finished building on a flatbed, is lifted onto a prepared base and connected to the services you have brought to the pad. Because walls, wiring, flooring and the wet zone are complete before dispatch, the site work is measured in days rather than months, and the envelope is never open to weather. Your groundwork needs to be finished and level before the delivery date, since the lift is booked against it.
What makes the studio and gym unit survive daily use by many people?
The specification picks hard-wearing surfaces and protected edges instead of domestic ones: wall boarding that takes impacts, a floor system that accepts mats and machines being moved, scuff bands along the traffic lines and doors that cycle repeatedly without sagging. Tell your advisor how many users pass through in a day and whether the space is also hired out, since that is what decides which finishes are offered. Each choice is priced line by line in the quotation.
Can the studio and gym unit include showers and a changing area?
Yes, and it is a drawing decision taken at specification stage: a wet zone whose floor is laid to drain, hot water calculated for the number of shower positions, and changing cubicles kept apart from the training floor. Your local plumber makes the supply and waste connections, while the drawings give the falls, the waterproofing detail and the position of every fitting. Say whether people only change or also wash, and the layout divides the space to match.
Related models
Tell us your project.
We'll quote in 24 hours.
Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.