Studio and gym unit kit with a light-gauge galvanised steel frame
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
- Each footprint fits a standard flatbed, keeping the route to your plot straightforward.
- Models across the range share one grid, so a second building lines up with the first.
- The frame is sized from your equipment schedule, so racks and platforms land on structure rather than on a lining.
- One clear training side lets a rig and a mirror wall run without a column in the way.
- A continuous insulated envelope holds class temperature while the door keeps opening.
Choose a configuration
A range of studio and gym buildings: frames taken from the equipment load, an insulated envelope and ventilation set for the people training.
A frame drawn around the equipment, not the room
Racks, a cable stack and a lifting platform each load a floor differently, so the frame is sized from the equipment schedule rather than from floor area alone. The frame is light-gauge galvanised steel, with beam sizes set model by model across the range. Each model is detailed for a design life of 50 years.
Comfort that survives a full class
A room holding twelve people behaves differently from one holding two: body heat and moisture climb, and the envelope has to hold temperature while the door keeps opening.
A floor that takes the work
The plan separates a sprung lifting zone from a hard-wearing circulation strip, because mats, dropped bars and trolley wheels ask different things of a surface.
Air and power sized for occupancy
Ventilation is calculated from the number of people in a session rather than the square metres, and extract is placed where warm moist air actually gathers.
One building, one delivery, one crew
The unit leaves the factory finished, so site work is a lift, a connection and a handover rather than a construction programme.
Placed for access, drainage and hire
A standalone gym needs a service vehicle to reach it and water to leave it, so pad, fall and door side are fixed together before anything is ordered.
| Structure | light-gauge galvanised steel |
|---|---|
| Design life | 50 years |
| Colors | Custom colours |
| Style | Modern |
Included as standard
- Prefabricated structural frame
- Roof and wall panels
- Doors and glazing
- Insulation package
- Fastening system
- Numbered assembly drawings
Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.
Can the studio and gym unit be wired for music and class lighting?
It is planned on the electrical drawing: speaker positions around the room with cable runs inside the wall, lighting circuits you can dim by zone, and spare sockets for a projector or charging points. Tell your advisor how many audio zones and how many lighting scenes you want, and the board position and circuit numbering come back in the pack handed to your electrician. Running this cable during assembly avoids opening the walls a second time, since they are still accessible then.
Can the studio and gym unit host classes, a club or paying members?
A building of this type can serve a club or be let by session, but the rules for that use are local and stricter than for a private gym: opening hours, how many people may be inside, exits, visitor access and sometimes parking. Confirm the intended use with your authority before the layout is finalised, and our advisor supplies the dimension drawings and specification the application relies on. Say at quotation stage if paying members are expected, because layout and finishes are then chosen differently.
Does the unit include showers and changing rooms?
They can be part of the plan, and it is far cheaper to draw them than to add them later: a wet zone laid to a fall, hot water sized for the number of shower positions, and cubicles kept apart from the training floor. Your plumber makes the supply and waste connections on site, while the drawings carry the falls, the waterproofing and every fitting position. Say whether people only change or also wash, and the layout divides the space to suit.
How is a gym building ventilated when the door stays shut in winter?
By treating air as a calculated system: supply and extract sized on the busiest session, a route for warm moist air to leave above the training zone, and controls an instructor can set without opening a panel. Heat recovery is worth having in cold climates, since it takes warmth out of the extracted air instead of throwing it away. Say how many people train at once and whether towels dry indoors, because both decide the air rates.
Can the unit take a lifting platform and dropped weights?
Yes, provided the platform is designed with the floor: a stiffened zone under the lifting area, a frame that carries the impact into the base, and a position chosen on the structural drawing. Dropped bars send a sharp load downward, so the platform and the floor build-up are specified together rather than a mat laid over a domestic deck. Tell your advisor the heaviest drop you expect and where the platform will sit, and the drawings show the reinforcement.
How much floor area does a studio and gym unit need for a class?
It depends on the discipline more than on a fixed number: a spin or circuit class wants a mat per person plus a metre of clearance around the equipment, while a strength session needs room behind the platform for a bar to be dropped safely. Give your advisor the class size and the equipment list, and the plan is drawn with the training floor, the circulation strip and the store as separate zones. The floor area then follows the layout rather than the other way round.
How is a standalone gym building delivered and set on site?
It travels as a finished building on a flatbed, is lifted onto a prepared base and connected to the services you have brought to the pad. Because walls, wiring, flooring and the wet zone are complete before dispatch, the site work is measured in days rather than months, and the envelope is never open to weather. Your groundwork needs to be finished and level before the delivery date, since the lift is booked against it.
How long does it take to assemble a studio and gym unit?
Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.
Related models
Tell us your project.
We'll quote in 24 hours.
Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.