Now shipping to 40+ countries · CE & ISO-certified, factory-direct Get a quote in 24h →

Tiny house on foundation on a permanent pad, with no road limits on the plan

A tiny house built to stay in one place: a panel kit on a fixed pad, with full-height walls, a staircase to the loft and services connected once instead of unplugged for the road.

Why this home
  • Fixed water, waste and power connections that stay connected for good.
  • Glazing sized with the heating load rather than added as an afterthought.
  • Craned over a fence and set down in a garden with no rear access.
  • Walls that rise to full height, because nothing has to clear a bridge.
  • A staircase with a handrail instead of a ladder hooked to the wall.

Choose a configuration

From $5,000 / piece Factory-direct indicative price · exact quote after consultation
Factory-direct pricing Ships worldwide

A tiny house built to stay in one place: a panel kit on a fixed pad, with full-height walls, a staircase to the loft and services connected once instead of unplugged for the road.

A frame that is never folded for the road

The frame is a welded steel portal, so the walls rise to full height and the loft floor spans between beams instead of sitting over a wheel arch. Posts land on base plates that are drilled and set out before delivery, which keeps the house square from the first lift.

Walls that hold heat in a small volume

Panels arrive with the insulation bonded to the structural core, so there is no cavity to fill on site and no cold strip at the corners. The glazed gable is the weakest part of a small envelope, which is why the glass is chosen together with the heating load rather than after it.

A staircase, a loft, and a plan that works

The loft is reached by a staircase with a handrail, and the space beneath it takes the bathroom or a wall of storage instead of being lost. Below, the kitchen runs along one side and leaves a clear route from the entrance to the glazing.

Connected once and then left alone

Water, waste and power come in as fixed connections with proper falls and insulation, because nothing has to be disconnected for a journey. A small ventilation unit runs continuously, taking moisture out of the kitchen and the shower before it settles on cold surfaces.

Lifted over the fence and set on the pad

The kit travels as wall panels, roof cassettes and a floor frame, and reaches a rear garden on a crane rather than a lorry. Assembly follows the numbered set: base plates, floor, walls and roof, with the shell closed before the kitchen and bathroom go in.

The plot decides the plan

Orientation settles where the glazing goes, how much sun the loft receives and whether the door faces the street or the garden. The pad is set out with drainage falls and anchor positions marked, so the house is held down where the engineer drew the straps and not wherever one happens to reach.

Tiny house on foundation on a permanent pad, with no road limits on the plan — Specifications
ColorsCustom colours
StyleModern

Included as standard

  • Prefabricated structural frame
  • Roof and wall panels
  • Doors and glazing
  • Insulation package
  • Fastening system
  • Numbered assembly drawings

Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.

Can a tiny house on foundation still be moved later?

Not easily, and that is the trade you accept with this version: a move takes a crane, a transport arrangement and a new base rather than a hitch and a drive. Most buyers choose it precisely because the site is settled — a garden, a family plot, a yard they intend to keep. If a move becomes likely, say so at drawing stage, because there is a middle route that keeps lifting points in the floor frame and lets the skirting come away in panels.

How long does it take to assemble a tiny house on foundation?

Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.

Does a tiny house on foundation still need vehicle registration or plates?

No — once the house rests on a permanent pad it is dealt with as a building, not a trailer: there is no registration, no plate, and no road lighting, braking or coupling to maintain. That is the quiet advantage of this version, because the plan no longer has to squeeze inside transport limits, so a proper head height, wider rooms and a fixed staircase all become possible. Vehicle paperwork is replaced by local planning rules, which your authority confirms; we supply the dimension drawing and the specification sheet your application needs.

How do water and waste connect when the house is permanent?

As fixed connections: the supply line and the waste run from the house to the mains or to an on-plot system at the depths and falls your ground allows, and the tap, drainage and electrical inlet positions are drawn against those points. Because nothing has to be unplugged for a move, pipes can be laid with proper cover and insulation and the waste can hold its fall the whole way, which is what makes a pad-built house behave like an ordinary one. Your advisor needs the connection layout before production so the floor and skirting details are built around it.

How much headroom is there in the loft, and can an adult stand up?

The ridge line and the knee walls set the standing zone, and the drawing includes a section through the loft so you can see where the ceiling falls away. Headroom at the stair is checked separately, because that is where a loft usually fails inspection. Ask for the section at the height you intend to use, whether that is sleeping, a desk or storage.

Can the kit be assembled by an owner-builder?

The panels are numbered and pre-drilled, so a competent owner can close the shell with a helper and a hired crane, working from the drawings. Electrical, plumbing and drainage still need licensed trades, and those connections are inspected before the linings close. The slow part is not the frame but the setting out, so allow time for the base and for the lift plan.

How do you keep a small house with a loft free of condensation?

Moisture comes from cooking, showering and drying clothes, and a small volume saturates quickly, so continuous ventilation matters more than a bigger heater. The vapour control layer has to stay continuous behind the lining, with taped joints around the loft hatch and any flue penetration. A humidity meter costs little and tells you whether the ventilation is doing its job.

What can be done on a sloping site?

The pad can step with the ground, with the high side cut in and the low side built up on retained fill, or the house can sit on longer piers cut to level. What matters is that the bearing points are designed together, so the floor frame is not spanning a void it was never drawn for. A survey before the pad is marked out saves a redesign later.

Tell us your project.
We'll quote in 24 hours.

Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.

Reply within one business day NDA on request English · German · French · Spanish

Request a quote — Tiny house on foundation on a permanent pad, with no road limits on the plan