Tiny house on wheels for family homes, villa projects and construction sites
A small house on its own trailer: a steel chassis with axles, brakes and a coupling, a light shell built around the towing limit, and a loft bed reached by a ladder that stows when the road calls.
- A battery and solar circuit kept separate from the mains supply.
- Levelling jacks, chocks and ground anchors for a pitch that stays put.
- A ladder that stows for the road and hooks on when you stop.
- Insulated walls and floor that keep a winter pitch usable.
- A welded trailer frame with the axles under the heaviest part of the plan.
Choose a configuration
A small house on its own trailer: a steel chassis with axles, brakes and a coupling, a light shell built around the towing limit, and a loft bed reached by a ladder that stows when the road calls.
The chassis is the floor, and the floor is the house
The trailer frame is welded as one piece, with the axles placed under the heaviest part of the plan and the coupling set for the hitch height of the tow vehicle. Outriggers carry the walls, so the shell is fixed to steel rather than to a timber platform that could work loose on a rough road.
A shell light enough to be towed
Walls are framed in light gauge steel and closed with a bonded panel, which keeps the weight low without turning the house into a caravan. Every fitting is fixed through the frame rather than into the lining, because a cupboard that holds on a driveway will not hold at motorway speed.
Sleeping above, living below
The loft takes the bed and leaves the floor for the kitchen, the wet room and a table that folds against the wall. The ladder is stowed for travel and hooks onto a rail when the house is parked, and the heaviest items sit over the axles to keep the hitch load predictable. Sleeping is arranged as 2 bedrooms, usually with the main bed in the loft. Owners use the house for family homes, villa projects and construction sites.
Tanks, a hookup and a gas locker
Fresh water, waste and power are carried on board, with the fill point, the hookup inlet and the gas locker grouped on one side so the pitch connections land in one place. The electrical panel separates the battery and solar circuit from the mains side, which is what lets the house run on a site with no supply.
The outline is drawn inside the road envelope
Width, height and length are fixed by what a country allows for ordinary towing, and anything beyond that travels as an abnormal load with permits and an escort. The route is checked for bridges, overhead lines and turning space before the date is set, because a house on a trailer cannot reverse out of a mistake.
Levelled, tied down and unhitched
Once parked, the trailer is levelled on jacks and blocks, the wheels are chocked and the frame is strapped to ground anchors rather than left standing on its suspension. A skirt closes the gap underneath, steps are hung at the door, and the coupling is checked again after the first night.
| External size | 5,900 × 6,300 × 2,480 mm |
|---|---|
| Bedrooms | 2 bedrooms |
| Colors | Custom colours |
| Style | Modern |
Included as standard
- Prefabricated structural frame
- Roof and wall panels
- Doors and glazing
- Insulation package
- Fastening system
- Numbered assembly drawings
Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.
Where may a tiny house on wheels be parked, and does the chassis help the application?
Rules for a house on wheels are local and, in some places, stricter than for the same plan on a foundation: one authority accepts seasonal placement, another registers the unit as a caravan, and a third wants it off the road in winter. Your local authority decides, and the chassis sometimes works in your favour because the unit reads as a vehicle rather than as a dwelling. We supply the dimension drawing and the weight and axle summary for your configuration, so the application goes in with documents rather than descriptions.
How long does it take to assemble a tiny house on wheels?
Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.
How do the water tanks work, and what happens in freezing weather?
Fresh water, grey water and the toilet are carried separately, each with its own drain and vent, so a tank can be emptied without dismantling the kitchen. In freezing weather the supply is drained down, the traps are emptied and any tank heater or pipe lagging is switched on before the temperature drops. Keep the drain valves reachable through a hatch, because that is the part you will want in a cold snap.
What foundation does it need?
A concrete slab, strip footings or pier foundations are all suitable, depending on soil and local practice. We supply the connection details for each option, so your local builder can prepare the base while the kit is in production.
Can the layout be customised?
Yes — window positions, glazing size, the number of bedrooms and the balcony deck are adjusted before production. The kit ships numbered and pre-drilled for the plan you confirm, so late changes are the expensive kind. Finalise the plan with our advisors, then the factory cuts.
How wide and tall can the house be if it must travel on roads?
The outline is set by the road rather than by taste: the trailer and the house together have to stay inside the width and height your country allows for ordinary towing, so the external dimensions are frozen at drawing stage for exactly that reason. Anything beyond that travels as an oversize load, with permits, escorts and a slower plan, and the design usually changes along with it. Tell your advisor which country will tow the house, and the outline is fitted to what will genuinely move there.
What does the chassis need for the country where the house will be towed?
The chassis is specified rather than inherited: axle group, brake type, coupling, jockey wheel, lighting and socket are all chosen against the road rules of the country where the house will actually be used. A braked chassis and a breakaway arrangement become the expectation as the loaded weight climbs, and the wiring is prepared for both. Your advisor confirms which items local rules call for, and that list is approved on drawings before the frame is welded.
How heavy does the house get, and what should tow it?
Loaded weight follows your specification: floor area, glazing, water systems and the chosen equipment level are what move it, so the tow vehicle has to be read against its own published hitch and braked-towing figures rather than against a guess. Before committing, ask your advisor for the weight estimate of that configuration and set it beside the vehicle data — axle count and tyre choice then follow from the result instead of leading it. Steady gradients, mirrors and braking on descents weigh as heavily as flat-road mass, so a substantial build wants a serious vehicle behind it.
Related models
Tell us your project.
We'll quote in 24 hours.
Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.