Flat pack house for family homes, hotels and offices
A flat-pack house arrives as numbered panels, posts and cassettes cut to a fixed plan, and the crew on site assembles a closed shell with factory-made openings, ready for the trades that follow.
- Panels, posts and beams cut to one plan in the factory.
- Sheathing and ring beams that turn four walls into a braced box.
- Insulation, membrane and cladding already in each wall cassette.
- Openings cut on the factory line, not on site.
- Conduits and pipe sleeves set into the panels before packing.
Choose a configuration
A flat-pack house arrives as numbered panels, posts and cassettes cut to a fixed plan, and the crew on site assembles a closed shell with factory-made openings, ready for the trades that follow.
Panels that brace each other into a box
Wall, floor and roof panels are cut and framed in the factory, then packed flat with the posts and beams that tie them together. Once the panels are stood and fixed, the sheathing and the ring beams turn the separate walls into a braced box, which is what stops a light building from racking in wind.
A wall build-up that travels flat
Each wall is a cassette with its insulation, membrane and cladding already in place, so flat packing does not mean a thinner envelope than a panelled house built in a workshop. The membrane is left lapped at the edges and taped on site, and the cladding is set to a gauge that keeps a consistent shadow gap at the corners.
Openings cut on the factory line
Windows and doors are cut on the factory line from a plan fixed before cutting, so the openings land where the kitchen and the stairs need them rather than being moved on site. Partitions arrive as separate panels with the door casings fitted, and the wet rooms are grouped so the drainage can run in one zone.
Services pulled through prepared holes
First-fix conduits and pipe sleeves are set into the panels at the factory, with the runs drawn on the panel schedule and the ends capped for transport. On site the electrician pulls through the prepared holes and the plumber connects at the wet wall, which keeps the second fix off the finished lining.
Bundles that arrive in build sequence
Panels travel on edge in bundles that follow the build sequence, with the floor bearers, the walls of each elevation and the roof cassettes loaded in the order they are needed. A container or a flatbed unloads with a forklift or a telehandler, and the bundles stay strapped until the crew reaches them so nothing is picked twice.
A base in tolerance and a marked set-out
The base is set out from the panel dimensions, not from the overall footprint on the brochure, because a few millimetres at the corner becomes a gap at the ridge. A levelled slab, screw piles or a ring beam give the crew a datum, and the panels are fixed down at the corners and along the wall lines before the roof goes on.
| Style | Modern |
|---|
Included as standard
- Prefabricated structural frame
- Roof and wall panels
- Doors and glazing
- Insulation package
- Fastening system
- Numbered assembly drawings
Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.
Does flat-packing compromise the insulation or the services?
No, because both are planned around the packing: wiring runs and pipe positions are marked on the panel drawings, with pre-cut openings travelling in the bundle, so electricians and plumbers on site pull through rather than cut new holes. Insulation ships in its own wrapped bundle and is cut to the clear depth between studs, so nothing arrives compressed. Where a service wall is pre-built, it travels as a protected module of its own and is set in place before the linings close.
How are the panels lifted, and what lifting points are built in?
Wall panels are usually lifted on edge with a sling or a lifting beam fixed to points marked on the frame, because a panel carried flat will bend its own lining. Roof cassettes and long floor units need a spreader so the load stays even, and the schedule states the weight and the centre of gravity of each piece. A forklift can move bundles around the site, but panels are not lifted by the window openings.
How long does it take to assemble a flat pack house?
Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.
What foundation does it need?
A concrete slab, strip footings or pier foundations are all suitable, depending on soil and local practice. We supply the connection details for each option, so your local builder can prepare the base while the kit is in production.
Can the layout be customised?
Yes — window positions, glazing size, the number of bedrooms and the balcony deck are adjusted before production. The kit ships numbered and pre-drilled for the plan you confirm, so late changes are the expensive kind. Finalise the plan with our advisors, then the factory cuts.
How many containers does a flat pack house ship in, and why does it matter?
Most of the house travels in standard containers, because wall and roof panels pack flat or on their edge and stack like cargo — which is precisely why this kind of building reaches remote or tightly budgeted sites at all. The container count for your house comes out of the drawing set and is shown as its own freight line in the quote, not buried inside the price of the building. Packing services and finishes together with the panels is what keeps that count down.
Are the panels packed in the order a crew needs them on site?
Yes — bundles are made up by wall line and numbered against the packing list, so the first crate opened holds the sole plates and external corners rather than the interior lining. Unloading in bundle order keeps a small site tidy and lets the shell rise without any panel being handled twice. The packing list travels with the drawing set, so the sequence can be read out before the crane is booked.
How flat does the base have to be before the panels arrive?
Flatter than most people expect: a panelled house squares itself to what it stands on, so a pad that wanders takes the corners out of square with it and door openings begin to rack. The tolerance your configuration leaves is marked on the setting-out drawing, and packing at the bearing points or a levelling screed is the normal remedy when the pour has drifted. Have the base checked against that drawing before the containers land, not after.
Related models
Tell us your project.
We'll quote in 24 hours.
Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.