Now shipping to 40+ countries · CE & ISO-certified, factory-direct Get a quote in 24h →

Steel structure villa with glass wool insulation

A villa built on a light-gauge steel frame: profiles are roll-formed to length from galvanised coil, panels are assembled and squared in the works, and the house arrives as walls, floors and roof ready to be screwed together on a prepared base.

Why this home
  • Panels banded by elevation, with their own screws and flashings.
  • Galvanised sections that keep their coating because nothing is welded.
  • A frame light enough to shrink the foundation and the lifting plan.
  • Insulated with glass wool, kept outside the steel line.
  • Profiles cut to the drawing, so the frame comes out square without site carpentry.

Choose a configuration

From $250 / m² Factory-direct indicative price · exact quote after consultation
Factory-direct pricing Ships worldwide

A villa built on a light-gauge steel frame: profiles are roll-formed to length from galvanised coil, panels are assembled and squared in the works, and the house arrives as walls, floors and roof ready to be screwed together on a prepared base.

Profiles formed to length, screwed not welded

Walls and roof are framed in cold-formed galvanised profiles, cut to the drawing and fixed with self-drilling screws, so the tolerance comes from the roll-former rather than from a saw on site. Nothing is welded on the plot, which leaves the galvanised coating intact and takes hot-work supervision out of the programme.

Insulation kept outside the steel studs

Steel carries heat far better than timber, so the build-up puts a continuous insulation layer outside the frame and fills the stud zone as well, with the vapour barrier on the warm side and a drained cavity behind the cladding. That keeps the inner face of the profile above the dew point, which is what prevents condensation forming on the metal. The wall is insulated with glass wool.

Open ground floor, floors as flat cassettes

A steel profile spans further than timber of the same depth, so the ground floor can stay open between the outer walls and the stair can land wherever the plan wants it. Upper floors arrive as cassettes with the deck already fixed, and they are lifted into place and screwed down in a morning. The floor area is 30 m². It is built for villa projects.

Service holes punched before the frame ships

Web holes for cables and pipes are punched at the works to a pattern agreed with the services drawings, with plastic grommets fitted so no cable rubs against cut steel. Nothing is drilled on site, and the service void behind the lining keeps pipes out of the insulation.

Panels stacked in the order they are raised

Wall panels travel banded and labelled by elevation, with the screws, brackets and flashings for each elevation in the same bundle, and a normal house fits on one lorry. Because the frame weighs a fraction of masonry, both the foundation and the lifting plan come down in size.

Sited for exposure, splash and drainage

Coastal salt, driving rain and ground water decide more about a steel house than the frame itself, so cladding, fixings and the base detail are chosen for the exposure of the plot rather than for a generic specification. The base stays above splash and the ground is graded away, so water never stands against the bottom rail.

Steel structure villa with glass wool insulation — Specifications
Insulationglass wool
Floor area30 m²
ColorsCustom colours
StyleModern

Included as standard

  • Prefabricated structural frame
  • Roof and wall panels
  • Doors and glazing
  • Insulation package
  • Fastening system
  • Numbered assembly drawings

Typical lead time: production 6–10 weeks, freight 3–6 weeks depending on destination port.

Does a steel frame carry cold into the walls of a steel structure villa?

Steel conducts, so the insulation is arranged outside and around the frame rather than only between the studs, with a break at the wall ties and around the openings. Window fixings, the floor-to-wall junction and the roof edge are detailed on paper instead of being solved on site, because that is where a thermal bridge appears. Your advisor sets the wall build-up for the climate you reported.

How much glass can a steel structure villa hold on the view side?

The steel frame takes concentrated loads, so wide glazed bays and full-height sliding walls are possible with a designed header over the opening rather than a post in the middle. The clear width, the glass make-up and the shading are settled in that same structural conversation, before the wall panels are produced, and the glazing is then specified for the climate you are building in. Tell us which side of the house faces the view.

How far does the cladding choice move the price of a steel structure villa?

Cladding is one of the biggest specification levers you have: render on a carrier board, fibre cement panels, metal sheets, timber boards or stone each need their own substrate and their own fixing frame, and each costs differently. Weight is checked against the steel and the cavity depth against the insulation, so the look you choose is priced line by line in the quotation rather than guessed. Send an image of the finish you want and the advisor will quote that build-up.

Is a steel structure villa a sensible choice on a seismic site?

Steel’s ductility is one of its arguments: the frame bends and its connections work instead of cracking the way a brittle wall does. Even so, the final design follows the seismic rules of your location, and your local engineer checks our connection and load data before production starts. Our advisor stays available for the questions raised during that check, and the same conversation applies on an exposed coast.

How long does it take to assemble a steel structure villa?

Most kits are weathertight within a few weeks of delivery: the frame and panels arrive prefabricated and the assembly crew works from numbered drawings. Interior finishing time depends on the configuration you choose. Count on 6–10 weeks of production plus 3–6 weeks of freight to your port before the kit lands.

What foundation does it need?

A concrete slab, strip footings or pier foundations are all suitable, depending on soil and local practice. We supply the connection details for each option, so your local builder can prepare the base while the kit is in production.

Can the layout be customised?

Yes — window positions, glazing size, the number of bedrooms and the balcony deck are adjusted before production. The kit ships numbered and pre-drilled for the plan you confirm, so late changes are the expensive kind. Finalise the plan with our advisors, then the factory cuts.

How is the steel frame of a steel structure villa protected from rust?

The framing arrives with a protective coating applied at rolling stage, and every cut, drill hole and weld made during fabrication is touched up before the wall closes. The detailing matters as much as the coating: the frame base stays above the drainage line, the cladding sits on a drained and ventilated cavity, and no steel is left buried in a wet build-up. Plots near the sea or in heavy condensation get a different specification, confirmed on drawings.

Tell us your project.
We'll quote in 24 hours.

Tell us your site, timeline and configuration and we'll return a feasibility note, indicative budget and one to three recommended models.

Reply within one business day NDA on request English · German · French · Spanish

Request a quote — Steel structure villa with glass wool insulation